Getting Started; Monitor Unit Installation; Battery And A/C Adapter - Lil' Jumbl Wireless Baby Monitor User Manual

Technical Specifications of Camera Unit
CMOS sensor:
Night vision:
Camera Tilt angle:
Audio:
Night light:
Lullabies:
Temperature sensor:
Front panel:
Power:
Mounting mechanism:
Control / buttons:
Dimensions:
Camera Unit
1. Antenna
2. Light Sensor
3. Power Button
4. Microphone
5. Camera Lens
6. Speaker
7. Camera Wall Mount
8. Battery Door
9. Night Light

3. Getting Started

3.1 Monitor Unit Installation

3.1.1 Battery and A/C Adapter

The monitor unit can be powered by either the Lithium rechargeable battery or the A/C adapter.
The battery will charge once A/C adapter is connected.
1. To insert the battery, open the battery door at the bottom
of the monitor unit, as shown in Pic.1.
2. Insert the battery noting the location of metal pins as indicated
in Pic.1 to assure correct direction.
3. Push the battery inside the bay until it locks and close the
battery door.
4. Plug the A/C adapter into the wall outlet then attach the
cord to the "DC IN" jack on the monitor unit.
5. LED power indication:
GREEN: Power on – battery not charging
ORANGE: Power on – battery charging
RED: Power off – battery charging
NO LIGHT: Power off – battery not charging
1/6" VGA, 640x480
8 x IR LEDs
+15 / -19 degree
Built-in microphone and speaker
Soft light
5 preset lullabies
Built-in
Interchangeable front panel
A/C adaptor or Lithium rechargeable battery
Detachable wall-mount bracket (Pan angle +/- 30 degree)
Power, Pairing
2.91" x 5.47" x 1.77"
1
5
2
3
4
6
2
Metal Pin
5
1
Battery Door
Battery
7
8
9
Pic.1