Zoom Mode; Camera Pairing Menu; Camera Properties Menu - Lil' Jumbl Wireless Baby Monitor User Manual

4.12 Zoom Mode

Tap the center of the image on the monitor screen to zoom one time. UP, DOWN, LEFT and RIGHT
arrows will appear on the screen.
Tap UP, DOWN, LEFT or RIGHT arrows to pan.
The image can pan UP or DOWN 10 times from the center, and LEFT or RIGHT 20 times from the center.
Tap the center of the image on the monitor to return to normal viewing mode

4.13 Camera Pairing Menu

The monitor unit can pair with four (4) different camera units simultaneously. In the Camera
Pairing menu, you can assign a camera number to different camera units. In the Main Menu, press
the CAMERAS icon.
Choose BEDROOM 1 (camera included in package) or PAIR (3 icons).
4.13.1 Pairing A Camera
To pair a camera, please follow steps below to pair it with the monitor unit.
1. Power on both the monitor and the new camera unit.
2. Press the menu icon to enter the user menu.
3. Select Cameras.
4. Choose a camera slot for the new camera unit. It is advised to use a camera slot that is available.
5. Open the battery door of the camera unit.
6. Find the PAIRING button near the DC jack. Press and hold it for three (3) seconds.
7. The user menu will indicate when the pairing process is completed.
8. Go to Camera Selection Menu and choose the new assigned camera number.
Note: The monitor unit will search for the new camera for 30 seconds. If you fail to pair within this
time, you may repeat step 4 as necessary. While the camera is in pairing mode, the night light will flash.
For troubleshooting and FAQ, please refer to the Troubleshooting and FAQ section in this manual.

4.14 Camera Properties Menu

This section contains instructions on how to select different camera units and set their properties.
The properties of each setting are shown below.
Note: Camera properties can only be viewed while the camera is connected. If the camera is not
connected, the menu will give you a choice to Reconnect, or Delete Pair.
Setting Description
Camera Name Select the camera units in use and
their properties will be shown
Volume The volume level of camera unit
Lullaby Select Lullaby; Play Sound
Night Vision Enable, Disable or set Auto for night
vision function
VOX Sensitivity High Sensitivity VOX will be triggered at
a lower sound level. Low Sensitivity VOX
will be triggered at a higher sound level.
Night light Enable or Disable night light function
Unpair Unpairs the camera
10
Options
Bedroom1-4, Babyroom, Nursery,
Playroom, Kitchen, Basement
1-5
Sound: 1-5 / Stay On: 1 min.,
10 min., 30 min.
Auto, On, Off
High, Medium, Low
On, Off
Confirm: Yes/No