Led Indicators; Default Interface Attribute Definition - D-Link DFL-260 Quick Manual

DFL-260 Quick Installation Guide

2.3 LED Indicators

LED
Power
Status
WAN
DMZ
LAN

2.4 Default Interface Attribute Definition

Wording on
Front plate
WAN
DMZ
Ports: 1~4
Note:
For security reason, default only allow LAN interface (192.168.1.1)
that can login into firewall GUI from Web browser. You also can
modify this configuration after login into firewall GUI. About the
detail set up procedure, please refer to the user's manual.
03
Status Color
Solid green Green
Light off
Solid green Green
Light off
Blinking green
Solid green Green
Blinking green
Light off
Solid green Green
Blinking green
Light off
Solid green Green
Blinking green
Light off
Default name Default interface
in firewall type definition
WAN DHCP client
DMZ
LAN
Description
The device is powered on.
The device is powered off.
System is operating properly.
The device is not working.
System is defective, such firmware
upgrade fail.
Link present
Port is sending or receiving data.
No link
Link present
Port is sending or receiving data.
No link
Link present
Port is sending or receiving data.
No link
Default interface
IP Address
Static IP 172.17.100.254/24
Static IP 192.168.1.1/24
Default
DHCP Status
N/A Enabled
Disable
Disable