Wide Mode With Pc - Sony BRAVIA KDL-32L5000 Operating Instruction

Wide Mode Wide Mode with PC
The Wide Mode feature allows you to select
the screen display to your preference. Based on
the original signal source, you may see black
bars around the picture or just on the both sides
of the screen. Sometimes you will see the
picture fill the full screen. This is due to the
signals your TV receives.
You can manually select available Wide
Mode settings as you watch your TV by
pressing the WIDE button on your remote
control or you can set your TV to Auto Wide.
To set Auto Wide
Press MENU then go to the Screen settings.
Select Auto Wide and set to On.
Wide Mode is also available for the PC
settings. When a PC is connected to the TV
and PC input is selected, you can change the
PC Screen settings.
Screen PC
III
PC Settings
Wide Mode Normal
~I)
Auto Adju'itnll?li:
PtBse 0
EEl
Pilch 0
- -
Horizontal
CPlltPI
0
cf
Vertltdl Center
0
Ci
EJ
•
Normal is available with 480i or 480p sources
only.
To change the Wide Screen Mode
Press WIDE repeatedly to cycle through the
available modes.
• Use the Auto Adjustment to adjust
the display position and phase of the
picture when the TV receives an input
signal from the connected Pc.
• Change the screen mode to
accommodate for the display of the
main window in PIP feature.
To change the Wide Screen Mode for
PC Timing
Press WIDE repeatedly to cycle through the
available modes while in the PC input mode.
Incoming PC signal
bQd
800 x 600
. .
Normal
I
I
bQd
I
Full 1
[[]]
Full 2
~
High-definition source
16:9 Original source 4:3 Original source
I
Standard-
IBouree
. .
Wide Zoom
Wide Zoom
~ ~ ~
Normal Normal
lli:HJ
This mode is not available.
~
Ib
-
Full
I
(1J)
B08
j
I
I
Zoom
I
Zoom
lr]
lr] L]
23