ENFORCER Varifocal Vandal Ball-Mount Dome Cameras Specifications: EV-2706-NFGQ EV-2726-NFGQ NTSC EV-2706-NFWQ EV-2726-NFWQ Model EV-2706-PFGQ EV-2726-PFGQ EV-2706-PFWQ EV-2726-PFWQ Type Vandal Rollerball Camera ” Sony Super HAD II Resolution 700 TV lines Pickup NTSC 976x494 pixels elements 976x582 pixels 3D-NR OSD Control...
Page 3
ENFORCER Varifocal Vandal Ball-Mount Dome Cameras Overview: Screws Case Camera ball Base (Only 2 shown. Use all 4 when installing.) Rubber Plug Female BNC Installation connector OSD Controller DC Plug with (WDR Models only) DC Jack terminal block Before Starting: Please read this manual carefully and keep it for Do not point the camera at the sun.
ENFORCER Varifocal Vandal Ball-Mount Dome Cameras Troubleshooting: • Check that the camera is powered up • Check that the power supply’s polarity is correct The screen is black • Check that the monitor is powered up • Check that the video cable connecting the camera to the monitor is connected properly •...
This manual is also suitable for:
Ev-2706-nfwqEv-2706-pfgqEv-2706-pfwqEv-2726-nfgqEv-2726-pfgqEv-2726-nfwq...
Show all
Need help?
Do you have a question about the EV-2706-NFGQ and is the answer not in the manual?
Questions and answers