Nvidia NFORCE 650I Ultra User Manual page 47

Press to auto-detect IDE and SATA channels in the system.
Enter
Once the channel is detected, the values for Capacity, Cylinder,
Heads, Precomp, Landing Zone, and Sector are automatically filled in.
None
There is no HDD installed or set.
Auto
The system can auto-detect the hard disk when booting up.
Manual
When you set the channel to
, you can then enter the number of cylinders, heads,
[CHS]
Precomp, landing zone, and sector. You can manually enter the
values or you can press
the min and max values.
IDE HDD Auto-Detect
IDE Channel 0 Slave
Access Mode
Capacity
Cylinder
Head
Precomp
Landing Zone
Sector
The BIOS supports the following HDD
Access Modes:
CHS
For HDD less than 528 MB.
LBA
For HDD greater than 528 MB and
supporting LBA (Logical Block
Addressing).
Large
For HDD greater than 528 MB but not supporting LBA.
and change
[Manual]
to display a window that tells you
Enter
[Press Enter]
[Manual}
[CHS]
0 MB
Press ENTER to display sub-menu
or enter number manually
.....0
[ 0]
[ 0]
[ 0]
Cylinder
[ 0]
Min=
Max=65535
Key in a DEC number :
:Move
Configuring the BIOS
to
Access Mode
0
ENTER:Accept ESC:Abort
35