Sony BRAVIA KDL-70W850B Manual page 43

Front
Enjoying
Movies/Music/Photos
Using lnternet Services
and Applications
Watching TV with
Friends Far and Near
Using Other Devices
Using BRAVIA Sync
Devices
Useful Functions
Connecting to the
Internet
Using Home Network
Configuring Various
Settings
Troubleshooting
Howto Use Bookmarks
[] Sensors and Illumination
Top Page > Parts Description > Front
• Remote control sensor
Receives signals from the remote control.
Point the remote control at the Sony logo to operate the TV.
Do not place anything near the sensor. Doing so may affect its function.
• Light sensor
Senses the room light level and adjusts the screen brightness accordingly.
Do not place anything near the sensor. Doing so may affect its function.
Illumination LED
The Illumination LED lights up or blinks in response to remote control operations and lights up in
different colors according to the status of the TV.
Blinking
(Blinking speed depends on status)
The TV is turned on
The TV is receiving an incoming call *2
The TV is in Picture off mode
Software update is in progress
Blinking
When the TV and a mobile device (e.g. smartphone) are connected wirelessly
"1
During recording (including SCART REC) or the TV is in pause mode *2
"1
The following Timer functions are set:
On Timer, Sleep Timer, Reminder (*2), REC Timer (*2)
37
• For simultaneous conditions, the upper condition in the table has priority.
• The Illumination LED does not light up when the TV is in standby mode, except when a recording is
in progress or the timer is set.