Canon CanoScan FS2710 Product Manual page 16

5. Close the film holder.
• Align the ends of the holder and lightly pinch them together until they lock.
• After you have locked the ends, squeeze and run your fingers along the middle
portion to prevent the film from floating.
6. Position the guide over the frame to be scanned.
• The guide will click into indents in the holder marking the correct position for
scanning as you slide it back and forth. Ensure that the tabs on the guide click
into the indents and that the image is correctly framed by the guide.
• Reload the film in the film holder if its edges stick out of the holder or the
guide's movement is impeded.
CanoScan FS2710 Film Scanner
Frame to be Scanned
16