Care And Maintenance - Canon CanoScan FS2710 Product Manual

Care and Maintenance

Follow the procedures below to clean dirt and dust off the exterior of the scanner.
1. Turn off the computer and peripheral devices, including the scanner.
2. Unplug the scanner's power cord, grasping it by the solid portion
of the plug.
3. Moisten a soft cloth with water and wring it well.
Wipe off the dirt and dust.
• Do not wet the connectors or metal parts of the back panel. Ensure that you
wipe these parts with a dry cloth if they should get wet.
• Do not wipe the equipment with an extremely wet cloth and do not spray
cleansers or water directly onto it. There is a risk that liquids could enter the
interior and degrade image quality or cause malfunctions or accidents.
• Never apply alcohol, thinners or benzene to the equipment. These substances
may distort, discolor or dissolve the casing.
4. Wipe off all moisture with a soft, dry cloth.
• Ensure that all moisture is removed from the unit.
CanoScan FS2710 Film Scanner
Never apply alcohol,
thinners or benzene to
the equipment.
27