Table 10. Removal steps of Serial Ultrabay Slim device or travel bezel
Holding the bay lock latch in the unlocked position
2
, and then pull out the Serial Ultrabay Slim device or the travel bezel in the direction shown by arrow
completely remove it
1030 Solid-state drive (SSD) or hard disk drive (HDD)
For access, remove the FRU:
•
"1010 Battery pack" on page 68
Attention:
• Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper
handling can cause damage and permanent loss of data.
• Before removing the drive, have the user make a backup copy of all the information on it if possible.
• Never remove the drive while the system is operating or is in suspend mode.
70
Hardware Maintenance Manual
Downloaded from LpManual.com Manuals
4
.
1
1
, slide the bay eject latch in the direction shown by arrow
3
to