To Connect A Video Source To The Video Display System - Nuvo V1360A User Manual

To Connect a Video Source to the Video Display System

CAUTION:
Take care to align the pins on the connector with the holes in the plug on the
input panel. Do not force the connector into the plug as this may damage the
connector.
Plug the video cable (supplied by others) into a Video Input Panel having the same video format.
Composite Video
NOTE:
The composite video cable must be twisted clockwise to ensure that the cable is securely locked.
The s-video connector can only be inserted in one orientation and does not have any mechanical
retention, other than the friction fit of the pins.
The RGB video cable must be secured with the two small jack screws on either side of the
connector.
M2Z00167
Nuvo Video Display Systems – User Manual
S-Video
Page 7
RGB Video