Table of Contents
Advertisement
Troubleshooting
Image Not Displayed
Monitor not powered on
Video source not powered on
Damaged video cable
Input selection doesn't match image
Incorrect monitor selection
Incorrect input selection
Monitor not in sync with source
Poor Image Quality
Damaged video cable
Monitor color settings incorrect
System Drift
Brake(s) set improperly
M2Z00167
Nuvo Video Display Systems – User Manual
Turn monitor power switch to ON
Turn video source power switch to ON
Replace with good cable
Re-select the input using the wall control
Select correct inputs for "A" and "B" monitors
Select correct inputs for "A" and "B" monitors
Turn monitor OFF and back ON
Replace with good cable
Adjust color setting to optimize the video
(see the user manual for the LCD display)
Adjust brakes (see the maintenance section)
Page 15
Advertisement
Table of Contents
