Instructions For Use; To Turn The Monitor On/Off - Nuvo V1360A User Manual

Instructions for Use of the Nuvo Video Display System
The Nuvo Video Display System is designed to view images from multiple sources, such as
endoscopic cameras, remote video cameras, radiology, pathology, PACS, etc.
Systems may handle up to four separate input signals via an optional video switching board,
although basic systems only handle one input.
Each source can be easily selected and viewed by pressing a button on the wall controls or on
the sterilizable handle at the monitor.

To Turn the Monitor On/Off:

Turn the monitor system on by using the on/off switch located on the back of the
monitor.
CAUTION:
Ensure the monitor is turned off when not in use. Failure to do so will decrease the life of
the monitor.
CAUTION
Some video sources are unstable during their power on sequence – it may be necessary to
turn the monitor power off, then back on for the image to be displayed properly.
CAUTION
The optional video display system requires the monitors are powered on before input
selections are made.
M2Z00167
Nuvo Video Display Systems – User Manual
Page 6
Monitor
On/Off
Switch