Nuvo Koolspace 110 Assembly & Operation Manual page 7

STEP 3 : HINGE,BASE AND LEGS INSTALLATION
Open Box VP3.
1
Fasten one HINGE (found in
door box) to the SIDE of the
cabinet with Hexbolts (B).
NOTE :
Hinge can be on either
side of the cabinet.
3
Fasten BASE to the BOTTOM
of the cabinet (FRONT BASE
has to be set with Base Tabs
4
Fasten BASE with HEX BOLTS (B)
NOTE: Fasten base with base tab away from the
front edge, then fasten and adjust the hinge
before fully tightening HEX BOLTS (B)
F
2
Install four LEGS (F)
into BASES fully in.
B
3
4
5
~ 7 ~
1
B
C
Raise cabinet and check for potential air
leaks at panel joints from inside.
F
3
5