Power Saving Mode; Screen Display; Important Safety Information - TP-Link M5360 Quick Installation Manual

Power Saving Mode

For power saving, you may encounter the three situations below:
1. The screen will turn off automatically after 60 seconds.
2. The WiFi connection will turn off automatically if no WiFi devices connect to
the M5360 for 15 minutes.
3. When the M5360 is in manual connection mode, the 3G connection will
disconnect automatically if internet activity idles for 5 minutes.
How do I recover from power saving mode?
In 1 and 2, you can simply tap the power button to recover.
•
In 3, you can log into the web-management page, and go to "
•
up",then click the Connect button to reconnect.
*Please refer to the User Guide to modify the 3G and Wi-Fi Power Saving default
settings.

Screen Display

Important Safety Information

Keep the device away from water, fire, humidity or hot environments.
•
Do not attempt to disassemble or modify the device.
•
Do not use damaged power adapter or USB cables to charge the device.
•
Do not use any chargers other than those recommended.
•
Do not use the device where wireless devices are not allowed.
•
*Please follow the above instructions when operating the device. We cannot
guarantee that no accidents or damage will take place due to improper use of
the device. Please use with care and operate at your own risk.
Network Type and Signal Strength
IInternet Connection
Auto Connection Mode
Manual Connection Mode
WiFi Status and User Numbers
Messages
Battery Meter
Download Speed
Upload Speed
Cumulative Traffic Usage
6
Advanced->Dial-