Handle Installation; Stainless Steel Models - Frigidaire FPHI2188PF Use & Care Manual

HANDLE INSTALLATION

CAUTION
Wear gloves and use extreme CAUTION when
installing these handles. The rounded end of
the handles may be sharp.
IMPORTANT
To ensure proper installation of handles, please
review these instructions and illustrations
thoroughly prior to installing the handles.
Additionally, before installing the door handles,
make sure the door swing is correct. Your
model will have either a right hand or left hand
door swing. Follow instructions in the Use &
Care Guide to reverse the doors, if necessary.
To attach metal refrigerator handle:
1. Place rounded part of handle onto shoulder
screw on face of door and align the two holes
in top of handle with the two holes in top of
door. Do not tighten the set screw yet.
2. Install the two screws into the top of the
handle.
3. Tighten the set screw on the rounded part of
the handle until the handle is flush with the
door, then tighten another ½ turn.
Shoulder
Screw
Set
Screw
To attach metal freezer handle:
1. Place rounded part of handle onto shoulder
screw on face of door and align the two holes
in bottom of handle with the two holes in
bottom of door. Do not tighten the set screw
yet.
2. Install the two screws into the bottom of the
handle.
6
Screw
Handle
Button
Plug
3. Tighten the set screw on the rounded part of
the handle until the handle is flush with the
door, then tighten another ½ turn.
Shoulder
Screw
Set
Screw
Screw

Stainless Steel Models

Screw
Shoulder
Screw
Set
Screw
Shoulder
Screw
Handle
Screw
Nameplate
Handle
Handle
Set
Screw