Akai KS808 Instruction Manual page 10

SETTING UP THE UNIT (Cont'd)
3. After the screws are fastened, please snap the screw covers onto the slot on both sides
to cover the screws.
Note: Make sure all screws are fully driven into the unit before snapping the screw
covers.
Assembling the Pedestal Unit and Main Unit
1. Hold the main unit by both hands and place onto the top holder on the top of the speaker
pedestal.
2. After the unit is placed stably on the top holder, fasten the main unit and the top holder
by FOUR butterfly head screws (supplied) by hand underneath the top holder.
NOTE: Please hold the main unit by one hand during fastening the screw.
BUTTERFLY
SCREWS
(SUPPLIED)
SCREW COVER
9
MAIN UNIT
TOP HOLDER
SPEAKER PEDESTAL