Silva EX-PED GO Instruction Manual page 11

4.3.2 QUICK SET MODE -
PEDOMETER SETTINGS - 3 OF 9
Pedometer Setting
[M]
1. Set Target
Alarm
ON / OFF
[M]
[M]
Sensitive Level
Setting
hold
[M]
'OFF' selected
Sleep Time
Setting
Pedometer (Sensitivity Level and
Sleep Time) Setting
Sensitivity Level: Adjusts the Pedom-
eter to user's walking or running pace.
Sleep Time: Sets the waiting time
for the Pedometer before it enters
the Sleep Mode when NO step is
detected.
How to Set the Sensitivity and
Sleep Time
In 'Pedometer Setting' 3 of 9, press
[M] to enter the setting display:
- Press [M] to move the flashing
(setting).
- Press [S/S] or [S/R] to change the
setting (Hold down [S/S] or [S/R] to
change the numbers continuously).
TIPS: To decide the most suitable sen-
sitivity level, walk or run while being in
this mode to
start the beeps. Choose the current
level if the beeping is matched with
the pace of the walk or run. Try another
level if it does not.
If the setting is completed, hold down
[M] to exit the testing display.
11