Sylvania SKCR2706BT-B Instruction Manual page 15

3. Turn on Bluetooth function of your device and enable the search or scan
function to find SKCR2706BT-B (see your device's instructions to add or
setup a Bluetooth device).
4. Select SKCR2706BT-B from the device list when it appears on you device
screen. If required, enter the pass code "0000" to pair (link)
SKCR2706BT-B with your device.
5. Once paired with a device, the icon
hear a sound confirms that pairing is completed.
6. If you want SKCR2706BT-B change to pair with another Bluetooth device.
Press and hold the PLAY/PAUSE, PAIR button for about 4~5 seconds.
The icon will flash, a tone beep soundwill be heard to confirm the unit
will go into Pairing/Discoverable mode again. Repeat steps 3 and 5.
To connect previously paired Bluetooth device
SKCR2706BT-B can store one previously paired device for quick pairing
during power on. When the unit is powered on and the previously paired
device is found within the operating range, the unit will pair the device
automatically.
NOTE:
• Due to different operating system of Bluetooth devices, the time taken
by pairing process might be different. If the pairing cannot be successful
in the first time, please try to restart the pairing process by pressing and
holding the PLAY/PAUSE, PAIR button again until the icon flash.
• The pairing time might be longer for the first time pairing or pairing a
new Bluetooth device.
• Make sure you have the latest firmware for your Bluetooth mobile
devices.
• Make sure your device is working properly. Check your device's manual
for details on Bluetooth pairing and linking.
• Refer to manual of your cell phones, tablet PC, computer or other
Bluetooth enabled device for Bluetooth operation since it may vary from
model to model.
PLAYING FROM A BLUETOOTH DEVICE
You can play music from your Bluetooth device wirelessly to
SKCR2706BT-B after pairing.
1. Selecting your favorite song by press the SKIP/TUNE
SKCR2706BT-B, or use the native controls on the connected Bluetooth Device to
skip forward or back to selected track.
2. Press the PLAY button on your Bluetooth device
PAIR button on SKCR2706BT-B to play or pause the Bluetooth device playback.
3. Adjust both theVOLUME +/- buttons of your SKCR2706BT-B and your
Bluetooth device until you reach a comfortable listening level.
will light steadily and your will
or the PLAY/PAUSE,
14
or buttons on