Sylvania SKCR2706BT-B Instruction Manual page 13

2. Press M+/CH+ or M-/CH-buttonson Main unit or Remote control select
Auto Search to scan your available channels and auto saving.
• Picture
1. Press the M+/CH+ or M-/CH- buttons on Main unit or Remote control to
select Config Menu, then press OK button to enter the following sub
menus.
2. Press M+/CH+ or M-/CH-buttonson Main unit or Remote control select
Picture, then press OK button to enter the following sub menus and
press buttons on Remote control to adjust the value in the sub menu.
Aspect Ratio : The LED screen will display the picture in 16:9 Wide
TV Format :NTSC
type.
• Caption
1. Press the M+/CH+ or M-/CH- buttons on Main unit or Remote control to
select Caption, then press OK button to enter the following sub menus.
2. Press M+/CH+ or M-/CH-buttonson Main unit or Remote control select CC
Display, then press OK button to enter the following sub menus and
press buttons on Remote control to adjust the value in the sub menu.
screen(Default) /AUTO/ 16:9 Pillar Box / 16:9 Pan
& Scan / 4:3 Letter Box / 4:3 Pan & Scan / 4:3 Full
ratio leaving a black border to either side of the
picture.
(Default) / PAL TV operating system to suit the playback
12