Listening To The Radio - Sylvania SKCR2706BT-B Instruction Manual

Notes:
1. Your Bluetooth enabled device will not play the music through the
speaker, even if connected (linked), if the device does not support
A2DP profile.
2. Remember to turn off the SKCR2706BT-B when you have finished
listening, s et the
3. Don't forget to switch off the power of your external audio device as
well

LISTENING TO THE RADIO

1.Press the STANDBY button to turn on the unit.
2. Press the SOURCE button to repeatedly to select
frequency will show on LCD display.
3. Press the SKIP / TUNE
station. If you press and hold the SKIP / TUNE
seconds, then release, the unit will automatically scan to the next
broadcasting station.
4. Press the button to turn the radio OFF.
TO SET/RECALL RADIO PRESETS
1. In FM mode, press the SKIP / TUNE
desired radio station.
2. Press the CLK SET / MEM button to enable the program function and
the program number "P01" will appear on the LCD display and "MEM"
icon flashing.
3. Press the M+ / CH+ or M- / CH- buttons to select the desired program
number of program.
4. Press the CLK SET / MEM button to confirm.
5. Repeat above steps #1 thru #4 to preset up to 20 stations.
6. To retrieve one of the preset stations already programmed, press M+ /
CH+ or M- / CH- buttons until you reach the desired program number of
the station.
button to the STANDBY mode.
or buttons to select the desired radio
15
FM mode, the FM
or buttons for 2
or buttons to select the