Related Manuals for IBASE Technology IB530F Series
Summary of Contents for IBASE Technology IB530F Series
- Page 1 IB530F/IB530 Series AMD Geode LX 3.5-inch Disk Size SBC USER’S MANUAL Version 1.0A...
- Page 2 Acknowledgments Award is a registered trademark of Award Software International, Inc. PS/2 is a trademark of International Business Machines Corporation. AMD, AMD Geode, and combinations thereof, are trademarks of Advanced Micro Devices, Inc. Microsoft Windows is a registered trademark of Microsoft Corporation. All other product names or trademarks are properties of their respective owners.
-
Page 3: Table Of Contents
Table of Contents Introduction ............1 Product Description ............. 1 Checklist ................2 Specifications ..............3 Board Dimensions ............... 4 Installations ............5 Installing the Memory ............6 Setting the Jumpers ............. 7 Connectors on IB530F ............10 BIOS Setup ............ - Page 4 This page is intentionally left blank. IB530F User’s Manual...
-
Page 5: Introduction
INTRODUCTION Introduction Product Description The IB530F 3.5-inch disk size SBC incorporates the AMD Geode LX processor with speeds of 433MHz (LX700), 500MHz (LX800) or 600MHz (LX900). It comes with one DDR SO-DIMM socket that has a capacity of 1GB system memory. The board supports two 10/100Mbps Ethernet, using Realtek RTL8100C controllers. -
Page 6: Checklist
INTRODUCTION Checklist Your IB530F package should include the items listed below. • The IB530F AMD Geode LX 3.5-inch Disk Size SBC • This User’s Manual • 1 CD containing chipset drivers and flash memory utility • Heatsink for AMD Geode LX processor •... -
Page 7: Specifications
INTRODUCTION Specifications AMD Geode LX CPU, 481-ball BGA LX800 @500MHz CPU Internal LX700 @433MHz Speed LX900@600MHz Power Management Award BIOS BIOS AMD CS5536 I/O companion multi-function south bridge Chipset One DDR SO-DIMM socket, Max. up to 1GB Memory LX900/LX800/LX700 built-in high performance 2D graphic Graphic controller, supports TFT, LVDS LCD &... -
Page 8: Board Dimensions
INTRODUCTION Board Dimensions IB530F User’s Manual... -
Page 9: Installations
INSTALLATIONS Installations This section provides information on how to use the jumpers and connectors on the IB530F in order to set up a workable system. The topics covered are: Installing the Memory ..............6 Setting the Jumpers ..............7 Connectors on IB530F ............... 10 IB530F User’s Manual... -
Page 10: Installing The Memory
INSTALLATIONS Installing the Memory The IB530F board supports one SODIMM DDR memory socket for a maximum total memory. The memory module capacities supported are 128MB, 256MB, 512MB and 1GB. Installing and Removing Memory Modules To install the DDR modules, locate the memory slot on the board and perform the following steps: 1. -
Page 11: Setting The Jumpers
INSTALLATIONS Setting the Jumpers Jumpers are used on IB530F to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the connectors on IB530F and their respective functions. Jumper Locations on IB530F ............ - Page 12 INSTALLATIONS Jumper Locations on IB530F Jumpers on IB530F ................Page Jumper Locations on IB530F ..............8 JP1: Clear CMOS Setting ................9 JP2: LVDS VDD Select (5V / 3.3V) ............9 JP3: HDD LED Pin Header ................ 9 JP4: CF Connector master/Slave Setting ............ 9 JP5, JP6: COM3,4 RS232 +5V/+12V Power Setting .........
- Page 13 INSTALLATIONS JP1: Clear CMOS Setting Use JP1 to clear the CMOS contents. Note that the power connector should be disconnected from the board before clearing CMOS. Function Normal (default) Clear CMOS JP2: LVDS VDD Select (5V / 3.3V) VDD Setting 3.3V JP3: HDD LED Pin Header Pin #...
-
Page 14: Connectors On Ib530F
INSTALLATIONS Connectors on IB530F The connectors on IB530F allows you to connect external devices such as keyboard, floppy disk drives, hard disk drives, printers, etc. The following table lists the connectors on IB530F and their respective functions. Connector Locations on IB530F ........... 11 CN1, CN2: RJ45 Connector ............ -
Page 15: Connector Locations On Ib530F
INSTALLATIONS Connector Locations on IB530F Connectors on IB530F............... Page CN1, CN2: RJ45 Connector ..................12 CN3: VGA CRT Connector ..................12 CN4: Compact Flash Card Socket ................12 CN5: FDD Connector ....................12 CN6, J13: Serial Ports ....................13 CN7: PC-104 Connector (Non DMA ISA ONLY,Not Support PCI) ...... 14 J2: Reset Switch ...................... -
Page 16: Cn1, Cn2: Rj45 Connector
INSTALLATIONS CN1, CN2: RJ45 Connector Pin # Signal Name RJ45-4A RJ45-5A RJ45-7A RJ45-8A CN3: VGA CRT Connector Signal Name Signal Name Green Blue N.C. DDCDA HSYNC VSYNC DDCCLK CN4: Compact Flash Card Socket CN5: FDD Connector Signal Name Pin # Pin # Signal Name INDEX... -
Page 17: Cn6, J13: Serial Port
INSTALLATIONS CN6, J13: Serial port CN6 is the D-sub type COM1 serial port connector Pin # Signal Name (RS-232) DCD, Data carrier detect RXD, Receive data TXD, Transmit data DTR, Data terminal ready Ground DSR, Data set ready RTS, Request to send CTS, Clear to send RI, Ring indicator J13 (COM2/3/4) is a 30-pin header type COM2/3/4 serial port (RS232) -
Page 18: Cn7: Pc-104 Connector
INSTALLATIONS CN7: PC-104 Connector The PC-104 connector* is a dual-in-line pin headers that support PC-104 ISA modules, with 64 pins and 40 pins in each line. The following table shows the their pin assignments. *(Non-DMA ISA ONLY) CON1 CON2 Signal Name Signal Name Signal Name Signal Name... -
Page 19: J2: Reset Switch
INSTALLATIONS J2: Reset Switch Pin # Signal Name Reset Ground J4: External Audio Connector J4 is a 12-pin header that is used to connect to the optional audio cable card that integrates jacks for Line In, Line Out and Mic. Signal Name Signal Name Pin #... -
Page 20: J6: Lvds Connectors
INSTALLATIONS J5: TFT Panel Connector (when board supports 18-bit) Here is the pin definition of J5 when it supports for 18-bit TFT flat panel LCD displays. Signal Name Pin # Pin # Signal Name +12V +12V Ground Ground 5V/3.3V 5V/3.3V N.C. -
Page 21: J7: Irda Connector
INSTALLATIONS J 7: IrDA Connector Pin # Signal Name Ir RX Ground Ir TX J9, J15: USB Connectors The J9, J15 USB pin header connectors support four USB 2.0 ports. Signal Name Signal Name Ground USB0- USB1+ USB0+ USB1- Ground J10: PS/2 Keyboard and Mouse Connector J10 is a 6-pin header for the external keyboard/mouse connector Pin #... -
Page 22: J14: Power Dc-In
INSTALLATIONS J14: Power DC-In Pin # Signal Name DC In (12V only) Ground J16: Digital 4-in 4-out Connector Signal Name Signal Name Ground Out3 Out1 Out2 Out0 IDE1: IDE Connector Signal Name Pin # Pin # Signal Name Reset IDE Ground Host data 7 Host data 8... -
Page 23: Bios Setup
BIOS SETUP BIOS Setup This chapter describes the different settings available in the Award BIOS that comes with the board. The topics covered in this chapter are as follows: BIOS Introduction ................ 20 BIOS Setup ................... 20 Standard CMOS Setup ..............22 Advanced BIOS Features ............. -
Page 24: Bios Introduction
BIOS SETUP BIOS Introduction The Award BIOS (Basic Input/Output System) installed in your computer system’s ROM supports various processors. The BIOS provides critical low-level support for a standard device such as disk drives, serial ports and parallel ports. It also adds virus and password protection as well as special support for detailed fine-tuning of the chipset controlling the entire system. - Page 25 BIOS SETUP Phoenix - AwardBIOS CMOS Setup Utility Standard CMOS Features Load Fail-Safe Defaults Advanced BIOS Features Load Optimized Defaults Advanced Chipset Features Set Supervisor Integrated Peripherals Set User Password Power Management Setup Save & Exit Setup PnP/PCI Configurations Exit Without Saving PC Health Status ESC : Quit : Select Item...
-
Page 26: Standard Cmos Setup
BIOS SETUP Standard CMOS Setup “Standard CMOS Setup” choice allows you to record some basic hardware configurations in your computer system and set the system clock and error handling. If the motherboard is already installed in a working system, you will not need to select this option. You will need to run the Standard CMOS option, however, if you change your system hardware configurations, the onboard battery fails, or the configuration stored in the CMOS memory was lost or damaged. - Page 27 BIOS SETUP Time The time format is: Hour : 00 to 23 Minute : 00 to 59 Second : 00 to 59 To set the time, highlight the “Time” field and use the <PgUp>/ <PgDn> or +/- keys to set the current time. IDE Primary HDDs / IDE Secondary HDDs The onboard PCI IDE connectors provide Primary and Secondary channels for connecting up to four IDE hard disks or other IDE devices.
- Page 28 BIOS SETUP Video This field selects the type of video display card installed in your system. You can choose the following video display cards: EGA/VGA For EGA, VGA, SEGA, SVGA or PGA monitor adapters. (default) CGA 40 Power up in 40 column mode. CGA 80 Power up in 80 column mode.
-
Page 29: Advanced Bios Features
BIOS SETUP Advanced BIOS Features This section allows you to configure and improve your system and allows you to set up some system features according to your preference. Phoenix - AwardBIOS CMOS Setup Utility Advanced BIOS Features Virus Warning Disabled ITEM HELP CPU Internal Cache Enabled... - Page 30 BIOS SETUP Swap Floppy Drive This item allows you to determine whether or not to enable Swap Floppy Drive. When enabled, the BIOS swaps floppy drive assignments so that Drive A becomes Drive B, and Drive B becomes Drive A. By default, this field is set to Disabled.
- Page 31 BIOS SETUP OS Select for DRAM > 64MB This option allows the system to access greater than 64MB of DRAM memory when used with OS/2 that depends on certain BIOS calls to access memory. The default setting is Non-OS/2. Small Logo (EPA) Show The EPA logo appears at the right side of the monitor screen when the system is boot up.
-
Page 32: Advanced Chipset Features
BIOS SETUP Advanced Chipset Features This Setup menu controls the configuration of the chipset. Phoenix - AwardBIOS CMOS Setup Utility Advanced Chipset Features CPU Frequency Auto ITEM HELP Memory Frequency Auto Menu Level > CAS Latency Auto Video Memory Size Output Display Flat Panel Configuration Press Enter... -
Page 33: Integrated Peripherals
BIOS SETUP Integrated Peripherals This section sets configurations for your hard disk and other integrated peripherals. The first screen shows three main items for user to select. Once an item selected, a submenu appears. Details follow. Phoenix - AwardBIOS CMOS Setup Utility Integrated Peripherals ITEM HELP Auto... - Page 34 BIOS SETUP Onboard LAN Boot ROM This feature allows users to enable or disable the onboard LAN boot ROM. The default setting is Disabled Onboard FDC Controller Select Enabled if your system has a floppy disk controller (FDC) installed on the motherboard and you wish to use it. If you install an add-in FDC or the system has no floppy drive, select Disabled in this field.
-
Page 35: Power Management Setup
BIOS SETUP Power Management Setup The Power Management Setup allows you to save energy of your system effectively. Phoenix - AwardBIOS CMOS Setup Utility Power Management Setup Disabled ITEM HELP ACPI Function Power Management Menu Level > ** PM Timers ** Disabled Standby Mode Disabled... -
Page 36: Pnp/Pci Configurations
BIOS SETUP PNP/PCI Configurations This option configures the PCI bus system. All PCI bus systems on the system use INT#, thus all installed PCI cards must be set to this value. Phoenix - AwardBIOS CMOS Setup Utility PnP/PCI Configurations ITEM HELP PNP OS Installed PCI Slot Menu Level... -
Page 37: Pc Health Status
BIOS SETUP PC Health Status This section shows the parameters in determining the PC Health Status. These parameters include temperatures, fan speeds and voltages. Phoenix - AwardBIOS CMOS Setup Utility PC Health Status ITEM HELP Menu Level > Current System Temp. 45°C/113°F Current CPU Temp 30°C/86°F... -
Page 38: Load Fail-Safe Defaults
BIOS SETUP Load Fail-Safe Defaults This option allows you to load the troubleshooting default values permanently stored in the BIOS ROM. These default settings are non-optimal and disable all high-performance features. Load Optimized Defaults This option allows you to load the default values to your system configuration. -
Page 39: Drivers Installation
DRIVERS INSTALLATION Drivers Installation This section describes the installation procedures for software and drivers under the Windows 2000 and Windows XP. The software and drivers are included with the motherboard. If you find the items missing, please contact the vendor where you made the purchase. The contents of this section include the following: Entertainment Encryption/Decryption Controller Driver .. -
Page 40: Entertainment Encryption/Decryption Controller Driver
DRIVERS INSTALLATION Entertainment Encryption/Decryption Controller Driver 1. In the Windows operating system, go to the Device Manager. 2. As shown below, click the Entertainment Encryption/Decryption Controller under Other devices. 3. In the following window, click the Driver tab and click OK to continue. - Page 41 DRIVERS INSTALLATION 4. In the Hardware Update Wizard, select No, not this time and click Next to continue. Then select Install from a list of specific location (Advanced). Click Browse to find the driver’s path in the CD provided - \AMD\AES.
-
Page 42: Vga Drivers Installation
DRIVERS INSTALLATION VGA Drivers Installation 1. In the Windows operating system, go to the Device Manager. 2. As shown below, click the Video Controller (VGA Compatible under Other devices. 3. In the following window, click the Driver tab and click OK to continue. - Page 43 DRIVERS INSTALLATION 4. In the Hardware Update Wizard, select No, not this time and click Next to continue. Then select Install from a list of specific location (Advanced). IB530F User’s Manual...
- Page 44 DRIVERS INSTALLATION 5. In the next screen, click Search for the best driver in these locations. Check Include this location in the search. Click Browse to find the driver’s path in the CD provided or enter the path directly - \AMD\Vga\.
-
Page 45: Audio Driver Installation
DRIVERS INSTALLATION Audio Driver Installation 1. In the Windows operating system, go to the Device Manager. 2. As shown below, click the Multimedia Audio Controller under Other devices. 3. In the following window, click the Driver tab and click OK to continue. - Page 46 DRIVERS INSTALLATION 4. In the Hardware Update Wizard, select No, not this time and click Next to continue. Then select Install from a list of specific location (Advanced). IB530F User’s Manual...
- Page 47 DRIVERS INSTALLATION 5. In the next screen, click Search for the best driver in these locations. Check Include this location in the search. Click Browse to find the driver’s path in the CD provided or enter the path directly - \AMD\Audio\XPe.
-
Page 48: Pci Bridge Driver Installation
DRIVERS INSTALLATION PCI Bridge Driver Installation 1. In the Windows operating system, go to the Device Manager. 2. As shown below, click Other devices, then Other PCI Bridge Device. IB530F User’s Manual... - Page 49 DRIVERS INSTALLATION 3. In the following window, click the Driver tab and click Update Driver to continue. IB530F User’s Manual...
- Page 50 DRIVERS INSTALLATION 4. In the Hardware Update Wizard, select No, not this time and click Next to continue. Then select Install from a list of specific location (Advanced). 5. In the next screen, check Include this location in the search. Click Browse to find the driver’s path in the CD provided or enter the path directly - \AMD\ITE8888.
-
Page 51: Appendix
APPENDIX Appendix A. I/O Port Address Map Each peripheral device in the system is assigned a set of I/O port addresses which also becomes the identity of the device. The following table lists the I/O port addresses used. Address Device Description 000h - 01Fh DMA Controller #1 020h - 03Fh... -
Page 52: Interrupt Request Lines (Irq)
APPENDIX B. Interrupt Request Lines (IRQ) Peripheral devices use interrupt request lines to notify CPU for the service required. The following table shows the IRQ used by the devices on board. Level Function IRQ0 System Timer Output IRQ1 Keyboard IRQ2 PIC2 (IRQ8-15) IRQ3 Serial Port #2... -
Page 53: Watchdog Timer Configuration
APPENDIX C. Watchdog Timer Configuration The WDT is used to generate a variety of output signals after a user programmable count. The WDT is suitable for use in the prevention of system lock-up, such as when software becomes trapped in a deadlock. Under these sort of circumstances, the timer will count to zero and the selected outputs will be driven. - Page 54 APPENDIX call Lock_Chip Enable_And_Set_Watchdog Endp ;[]=============================================== ; Name : Disable_Watchdog ; IN : None ; OUT : None ;[]=============================================== Disable_Watchdog Proc Near call Unlock_Chip mov cl, 07h mov al, 08h call Write_Reg ;switch to LD8 xor al, al mov cl, 0F6h call Write_Reg ;clear watchdog timer xor al, al...
- Page 55 APPENDIX ;[]================================================ Unlock_Chip Proc Near mov dx, 4Eh mov al, 0Aah out dx, al Unlock_Chip Endp ;[]================================================ ; Name : Write_Reg ; IN : CL - register index AL - Value to write ; OUT : None ;[]================================================ Write_Reg Proc Near push ax mov dx, 4Eh mov al,cl...
- Page 56 APPENDIX This page is intentionally left blank. IB530F User’s Manual...
Need help?
Do you have a question about the IB530F Series and is the answer not in the manual?
Questions and answers