Table of Contents
Advertisement
SPECIAL
-
In Special menu, if AP key is pressed, Blemish, Priority, Posi/Nega, and Sharpness can be
adjusted.
LENS
WDR
DAY/NIGHT
AWB
SPECIAL
EXIT
Use ▲ ▼ ◀ ▶ , AP to select
Blemish
Blemish Mode is selectable between ON and OFF using Pan Left/Right.
When BLEMISH is "ON", it compensates for pixels with uneven light levels (white spots).
Caution: Before selection of Blemish ON, lens must be covered so the sunlight is blocked to the
CCD.
Priority
Set Priority using Pan Left/Right on Priority Mode. Set to Remote to use the OSD menu system. (This
must be set before making any other menu selections for the settings to take effect.) When setting to
DIP SW, menu setting values will not be applied. Use the DIP switch on the rear of the camera for
settings.
POSI/NEGA
In Posi/Nega mode, brightness of video shows (+: normal, -: reverses to negative image).
Sharpness
In Sharpness mode, outline of video image can be controlled.
At high level, outline is clear; however, when level is too high, noise can occur.
16
MANUAL4
BLC
COLOR4
AWC
4
QUIT
XX181-05-00 Rev 1208 VN-855V5 IP Camera
(SPECIAL)
BLEMISH
OFF
PRIORITY
DIP SW
POSI/NEGA
+
SHARPNESS
96
Use AI to exit
Advertisement
Table of Contents
