Table of Contents
Advertisement
2. Select the camera from the list and then select the driver, ViconMenu.dll. The ViconMenu will display.
Select the Menu button for the menu to display. Follow the onscreen instructions to navigate the menu
system or refer to the instruction manual for the camera.
Note: The camera defaults to DIP switch settings. The PRIORITY setting in the SPECIAL menu must be set
to REMOTE in order to set the OSD settings. This must be done the first time on every camera in the
system.
10
ViconNet GUI for VN-855WDR OSD Menu
XX181-05-00 Rev 1208 VN-855V5 IP Camera
Advertisement
Table of Contents
