Brauniger AV Pilot II Operating Instructions Manual page 24

Operating Instructions AV Pilot II
Time measurement and temperature display option mode
The temperature display can be switched on or off at the first level of option mode. If it is swit-
ched on, the TEMP indicator will flash as well as a TIME indicator. When the temperature dis-
play is switched off, only the TIME indicator is on.
The unit of the temperature display (° Celsius or ° Fahrenheit) can be selected at the second
level using the key and the
START - STOP
RESET
Logbook
General remarks
The maximum values of the current flight and those of the previous 19 flights are saved in
memory and can be invoked in the MEMO display . You can access the MEMO display by
repeatedly pressing the
The maximum values saved are:
• Maximum absolute altitude
• Maximum relative altitude
• Maximum ascent and descent
• Flying time
• Date
The key and the
CLEAR ALT 2
START - STOP
RESET
flight, the peak values of which are continuously updated. Flight 19 is the least recent flight
and is deleted whenever a new flight is saved to memory.
A flight is saved to memory automatically when the instrument is switched off. (Condition:
the instrument has been switched on for at least 3 minutes and a difference in altitude of at
least 50 meters has been attained.)
Logbook setting mode
All flights in the logbook can be deleted in setting
mode. Cl appears in the MEMO display. The log-
book memory is deleted by pressing the
for 4 seconds. As soon as the memory has been
deleted, all the segments of the display will flash
briefly and the instrument starts up again.
key.
CLEAR ALT 2
key until the MEMO indicator appears.
TIME
SPEED
MEMO
ALT 1
ALT 2
VARIO bar display
CHRONO
Lower display
key are used to display the flight required; flight 0 is the current
key
MEMO
MEMO 4 Sec.
MEMO
Mode SET
Clear MEMO (ALT 4sec.)
22