Using Set Menu; Displaying The Osd (On-Screen Display) - Yamaha YSP-600 Owner's Manual

Displaying the OSD (on-screen display)

This section describes how to display the OSD (on-screen display) of this unit on your TV screen and to set the
parameters for your listening room. Once this is complete, you can enjoy real surround sound while watching TV in the
comfort of your own home.
1
Check that the video input jack on your TV is
connected to the VIDEO OUT jack on this unit
to display the OSD of this unit.
2
Press STANDBY/ON to turn on the power of
this unit.
STANDBY/ON
Front panel

Using SET MENU

STANDBY/ON
or
Remote control
3
Turn on the power of your TV.
The following screen appears on your TV.
YSP-600
Push [MENU] to begin set-up
OSD screen example
If the OSD does not appear, use the remote control
supplied with your TV to switch the video input until
the OSD appears.
USING SET MENU
29
En