Replacement Parts - Numark DIMENSION 3 Operating Manual

WARNING: To reduce the risk of fire or electrical shock,
do not expose this appliance to rain or moisture.
Electrical equipment should NEVER be kept or stored in
damp environments.
SERVICE INSTRUCTIONS
•
Disconnect power cord before servicing
• Replace critical components
with factory parts or recommended
equivalents
•
For AC line powered units - Before
returning repaired unit to user, use an
ohmmeter to measure from both AC plug
blades to all exposed metallic parts. The
resistance should be no more than
100,000ohms.
Check the total maximum power of
your AC wall outlet. If you connect
several units to one wall outlet you
could overload the wall outlet, which
could cause fire.
Health Advice: This unit produces and absorbs
electromagnetic radiation. The strength of radiation and
the sensitivity for disturbing interference matches the CE
requirements. A corresponding sign is printed on the
backside of the unit. Any change or modification may
affect the behavior of the unit concerning
electromagnetic radiation, with the CE requirements
eventually not to be met any more. The manufacturer
takes no responsibility in this case.
Please record the serial number of your unit as shown on the back of the chassis as well as the
name of the dealer from whom you purchased the unit. Retain this information and your original
purchase receipt for your records. Please return the enclosed warranty card to register unit with us.
MODEL: __________________________
SERIAL NUMBER:___________________
©2001 Numark Industries
Unpacking / Setup: Please check your amplifier for any
damage after unpacking (before connecting) and contact
your dealer in case of any related complaints. Take care
of choosing your installation place and the correct AC
connection. If built into a case, be aware that the depth
and the weight of the amplifier does require an additional
fixing on the backside or the use of rack shelf supports.
only
Never mount the amplifier in a rack just by fixing it on the
front plate - we can show no responsibility for damage
on the rack or the amplifier in this case.
Always try to separate low level cables (input cables)
and high level cables (AC net and speaker outputs) to
avoid interference.
For 220-volt use in USA, use NEMA style 220-volt plug.
For other countries use proper plug for local outlet.
PURCHASED FROM:_________________________
DATE OF PURCHASE:________________________
- The Leader in DJ Technology
- 3 -
DIMENSION 3 & 4 AMPLIFIERS
DOUBLE INSULATED - When
servicing use only identical

replacement parts

http://www.numark.com