Samsung 4 SERIES User Manual page 16

Screen Burn Protection

Configures the Screen Burn Protection Options to prevent and reduce pixel burn.
When an image remains in one position too long, it may cause a permanent burn on the screen.
• Pixel Shift: To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This
technology enables you to set picture movement up/down (Vertical Line) and side to side (Horizontal). The Time setting allows
you to program the time between movement of the picture in minutes.
Set Pixel Shift to On by pressing the ▲ or ▼ button, then press the ENTERE button.
N
Select the required option by pressing the ▲ or ▼ button, then press the ENTERE button.
N
Available options: Horizontal, Vertical, Time.
N
Optimum condition for pixel shift
N
The Pixel Shift value may differ depending on the monitor size (inches) and mode.
N
This function is not available in the Screen Fit mode.
N
• Scrolling: This function helps remove after images on the screen by moving all the pixels on the PDP according to a pattern
Use this function when there are remaining after images or symbols on the screen especially when you displayed a still image
on the screen for a long time.
• Side Grey: When you watch TV with the screen ratio of 4:3, the screen is prevented from any damage by adjusting the white
balance on both extreme left and right sides.
- Dark: When you set the screen ratio to 4:3, it darkens the left and right sides.
- Light: When you set the screen ratio to 4:3, it brightens the left and right sides.
Reset → OK / Cancel
❑
Resets all picture settings to the default values.
Select a picture mode to be reset. The reset is performed for each picture mode.
N
Downloaded From TV-Manual.com Manuals
Item
Horizontal 0~4
Vertical 0~4
Time (min) 1~4 min
TV/AV/Component/HDMI
2
2
2 min
English - 15
T V Picture
Mode : Standard
Cell Light
Contrast
Brightness
Sharpness
Colour
Tint (G/R) G 50
Advanced Settings
Picture Options
Reset : OK
Move Enter
8
95
45
50
50
R 50
Return