Preferences - Philips fxd18 User Manual

[Off] – Disables audio output from the
•
TV. The sound is only output through the
speaker system.
[Audio Sync]
Sets the default delay time for audio output
when you play a video disc.
1) To start, press OK.
2) Select a speaker delay in the menu, then
press to set the delay time.
3) Press OK to confirm and exit.
[Speaker Setup]
Optimizes surround output for the connected
speakers system.
[Speakers Volume] – Sets the volume level
•
of each speaker to get the ideal audio
balance.
a Press OK.
b Select a speaker, then press
the volume.
c Press OK to confirm and exit.
[Sound Mode]
Selects a preset sound effect to enhance the
audio output.
[MAX ON], [JAZZ], [ROCK], [TECHNO],
•
[POP]
[Treble/Bass]
Sets the high frequency (treble) and low
frequency (bass) settings of the unit.
[Night Mode]
Makes loud sound level softer and soft sound
level louder so that you can watch the DVD
movies at a low volume, without disturbing
others.
• [On] – Enjoys quiet viewing at night.
[Off] – Enjoys surround sound with a full
•
dynamic range.
•
This feature is applicable only to Dolby Digital encoded
discs.

Preferences

On the [Preference] (Preference) page, you can
set the following options:
[Audio]
Selects the default audio language for disc play.
[Subtitle]
Selects the default subtitle language for disc play.
[Disc Menu]
Selects the language for disc menu.
to adjust
•
If the language you have set is not available on the disc,
the disc uses its own default language.
•
For some discs, the subtitle/audio language can only be
changed from the disc menu.
•
To select the languages that are not listed in the menu,
select [Others]. Then check the Language Code list at
the back of this user manual and enter the respective
4-digit language code.
[Parental Control]
Restricts access to discs that are unsuitable for
children. These types of discs must be recorded
with ratings.
1) Press OK.
2) Select a rating level, and then press OK.
3) Press the numeric keys to enter the
password.
Note
Note
EN 25