Sony dav-is10 Operating Instructions Manual page 29

Tip
• You can remove the speaker cords from the connector. With the catch facing down, press and hold the connector
down against a flat surface (1) and remove the speaker cords from the connector (2).
To avoid short-circuiting the speakers
Short-circuiting of the speakers may damage the system. To prevent this, be sure to follow these
precautions when connecting the speakers. Make sure the bare wire of each speaker cord does not touch
another speaker terminal or the bare wire of another speaker cord, such as shown below.
Note
• Be sure to match the speaker cords to the appropriate speaker terminals: 3 to +, and # to –. If the cords are
reversed, the sound will lack bass and may be distorted.
Downloaded From TheatreSystem-Manual.com Manuals
(1)
Catch
Stripped speaker cord is
touching another speaker
terminal.
(2)
Stripped cords are touching each
other due to excessive removal of
insulation.
29
GB