Initial Configuration - Samsung galaxy S4 User Manual

Note: Before beginning your initial WatchON application setup,
confirm your TV is turned off.

Initial Configuration

1. Sign into your Samsung account.
2. From the Home screen, tap
Note: If you are not connected to an active Wi-Fi, you may be
prompted to continue the set up process via a mobile
network. Click Connect to proceed.
3. Tap START.
4. If the automatic country selection is not correct, tap
and tap the desired country for your TV Guide's source
listing.
5. Enter your current postal code and tap
must correspond to the location of your desired TV and
set top box.
6. From the Find your TV service screen, select your
service provider from the list.
7. Tap OK to set up your remote control.
8. Ensure your TV is turned off then tap Next.
➔ WatchON .
. This code
9. Point your phone at the TV and tap Next.
10. From the Select your TV brand screen, tap your TV
manufacturer's name.
• If you have a brand of TV not listed or you are using a
projector, select from one of the following two options.
Choose from either SHOW OTHER BRANDS or I HAVE A
PROJECTOR.
11. Tap Next.
12. Aim your device at the TV and tap Button 1
on the TV.
Note: The process of the initial TV activation can take up to 10
seconds. Please do not press the button again.
13. If the TV turned on, tap YES.
– or –
If the TV did not turn on after tapping Button 1 and
waiting 10 seconds, tap NO and continue tapping each
button until the TV turns on, then tap YES.
14. From the Add Cable/Satellite box screen:
to turn
Applications 181