Table of Contents
Advertisement
Maintenance
■Attaching
Adjust the mark of the inner cylinder cap
with the "Release"
● If dust is accumulated in the groove, wash it away with water.
Note
● Attach the inner cylinder cap before operation.
Without it, dust is accumulated inside the inner cylinder cap, which may cause malfunctions.
3
Thoroughly dry and attach the inner cylinder filter.
Adjust the protrusion of the inner cylinder filter with the groove of the dust case.
Attach the clean filter, sponge filter and filter cover. (P.E-17, E-18)
Inner
cylinder
filter
E-22
(adjustment) mark.
mark
Inner cylinder cap
(Adjustment) mark
Protrusion
Groove
Pushing the inner cylinder cap, turn it
in the "Attach"
(adjustment) mark
direction until you hear a "click" sound.
This marking indicates
Click
"Attach".
Inner cylinder cap
Filter cover
Clean filter
Sponge filter
Advertisement
Table of Contents
