Hitachi PV-XC500 Instruction Manual page 14

How to clean
You can change to various angles and lengths according to the area to be cleaned.
2 angles are available.
You can rotate in 45° increments.
Risk of injury.
● Do not press the length adjustment button
● When shortening the extendable multi angle
CAUTION
● When changing the angle, do not hold the
● Do not rotate while your fingers are inserted into the inlet
Note
● When using the extendable multi angle wide
brush, note the following points.
Do not add excessive force. Doing so may result in damage.
- Do not use it to clean the floor.
- Do not let it fall or add excessive force in the
A
direction of .
- To change the length, do so pressing the length
adjustment button.
- To change the angle of the inserting side, do so pressing the angle adjustment button.
● You can wash the inlet of the extendable multi angle wide brush with water. After washing, thoroughly air dry before use.
Vacuuming water may result in damage.
● If fibrous dust clogs the end or interior of the multi angle wide brush, suction power is reduced, so remove
the dust.
Using the linen beat head
The linen beat head can vacuum mite dirts and dead
bodies, fine dust, lints, etc. without damaging the blanket.
E-14
during operation. The extendable multi angle
brush may shorten suddenly.
brush, do not hold the uneven part of the inner
pipe. Your hand may get pinched.
rotating section. Your hand may get pinched.
of the multi angle brush. Your fingers may get pinched.
Linen beat head
3 angles are available.
Multi angle brush
You can adjust the length as you like.
Adjustment
Pressing the length adjustment button
Uneven part of the inner pipe
CAUTION
The linen beat head can be washed with water.
(After washing, thoroughly air dry in the shade
before use.)
Note
Do not firmly press on the linen beat head.
Doing so may cause deformation or damage.
Rotating
section
Inlet
(do not insert fingers)
A
Risk of damage to the floor.
Do not use the linen beat head for
cleaning the floor, tatami, carpet, etc.