Problems With The Projector - Acer K135 Series User Manual

9
10
11

Problems with the Projector

#
1
Downloaded From projector-manual.com Acer Manuals
•
Image is too small
or too large
•
•
Image has slanted •
sides
•
•
Image is reversed
Condition
The projector stops responding
to all controls
Adjust the zoom ring on the top of the projector.
Move the projector closer to or further from the
screen.
Press "MENU" on the remote control or on the
control panel. Go to "Image --> Aspect Ratio" and
try different settings.
If possible, reposition the projector so that it is
centered on the screen.
Press the "Keystone" on the OSD until the sides are
vertical.
Select "Image --> Projection Mode" on the OSD and
adjust the projection direction.
If possible, turn off the projector, then
unplug the power cord and wait at least 30
seconds before reconnecting power.
Solution
27