Image - Acer K135 Series User Manual

20

Image

Projection Mode
Projection Location
Aspect Ratio
Auto Keystone
Manual Keystone
Sharpness
Downloaded From projector-manual.com Acer Manuals
•
Front: The factory default setting.
• Rear: Reverses the image so you can project from behind a
translucent screen.
•
Auto: Automatically adjusts projection location of image.
•
Desktop
• Ceiling: Turns the image upside down for ceiling-mounted
projection.
Use this function to choose your desired aspect ratio.
•
Auto: Keep the image with original width-higth ratio and maxi
mize the image to fit native horizontal or vertical pixels.
•
4:3: The image will be scaled to fit the screen and displayed using
a 4:3 ratio.
• 16:9: The image will be scaled to fit the width of the screen and
the height adjusted to display the image using a 16:9 ratio.
•
Full: Resize image to fit full screen by width (1280 pixels) and
height (800 pixels).
•
L.Box: Keep original signal aspect ratio and zoom in by 1.333
times.
Automatically adjusts vertical image.
Adjust image distortion caused by tilting projection. (±40 degrees)
<Note> The Manual Keystone function is unavailable under Auto
Keystone setting to "On".
Adjusts the sharpness of the image.
•
Press to decrease the sharpness.
• Press to increase the sharpness.