Hyundai HYBC3000 User Manual page 5

1.4.6. Clean up all spills promptly using correct methods i.e. absorbent granules and a lidded bin.
1.4.7. Dispose of waste fuels correctly.
1.5. Petrol safety.
1.5.1.1. Always fuel and defuel in well-ventilated area.
1.5.1.2. Always wear correct, suitable and fit for purpose Personal Protective Equipment
(PPE), suggested items are as follows, but are not limited too.
1.5.1.3.
1.5.1.4.
1.5.1.5.
area.
1.5.1.6. When defueling always use a propriety fuel retriever.
1.5.1.7. Always carry fuel in the correct and clearly marked container.
1.6. Tool safety
DO NOT modify the unit in any way.
Only use the tool for the job for which it is intended.
Always remove HT lead from spark plug when checking machine or changing parts.
1.6.1. Inspect tool before each use, and replace any damaged parts before
operation. Check for fuel leaks and make sure all fasteners are secure and in place. Make sure
the safety guard is properly attached.
1.6.2. Replace parts that are cracked, chipped or damaged in any way before using the tool. Make
sure the safety guard is properly attached.
1.6.3. Use only recommended accessories and parts, approved by the manufacturer. Non
approved attachments may cause damage to the machine or harm to the user, and will also
void your machine's warranty.
1.6.4. When replacing the cutting attachments or any other parts, always use a certified
replacement sourced from the manufacturer. Only use genuine Hyundai spare parts.
Hand protection.
Protective clothing.
Respiratory protective equipment should be used when in an unventilated
Page 5 Ver 4