Team Orion advantage iq605 Instruction Manual page 14

 Lithium battery type
Different types of Lithium battery require different charge end voltages.
LiPO V.Type
LiPo = lithium polymer
LiFe = lithium iron
LiIo = lithium Ion
 Lithium battery auto detection
In certain situations, the charger may detect the lithium battery cell count incorrectly. You can try
modifying this setting to prevent this.
LiPo/Li-Ion/LiFe
CHK Time 10min
 NiMH/NiCd delta-peak sensitivity
This setting adjusts the automatic delta-peak charge cut-off sensitivity. Use a higher value if the charge
tends to stop prematurely and a lower value if your battery is too hot at the end of the charge. Default
value is 7mV/cell for NiMh and 12mV/cell for NiCd.
NiMH Sensitivity
D.Peak Default
NiCd Sensitivity
D.Peak Default
 USB data output and temperature monitoring
The connector on the left panel can be used to connect an optional temperature probe for battery
temperature monitoring or an optional USB adapter to transfer data to a computer. You can enable or
disable the USB output and adjust the battery charge cut-off temperature. The temperature monitoring
and USB functions cannot be used simultaneously.
14
3.7V
Team Orion Advantage IQ605