Samsung BD-E5700 User Manual page 31

PROBLEM
The screen is blank.
Forgot PIN
If you experience other problems.
The picture is noisy or distorted
No HDMI output.
Abnormal HDMI output screen.
Downloaded From Disc-Player.com Samsung Manuals
SOLUTION
• If the HDMI output is set to a resolution your TV cannot support (for
example, 1080p), you may not see a picture on your TV.
• Press the p button (on front panel) for more than 5 seconds with
no disc inside. All settings will revert to the factory settings.
• When the factory default settings are restored, all stored user BD
data will be deleted.
• Press the p button (on front panel) for more than 5 seconds with
no disc inside. All settings including the password will revert to the
factory settings.
Don't use this unless absolutely necessary.
• When the factory default settings are restored, all stored user BD
data will be deleted.
• Go to the contents and find the section of the user manual that
contains the explanations regarding the current problem, and follow
the procedure once again.
• If the problem still cannot be solved, please contact your nearest
Samsung authorized service center.
• Make sure that the disc is not dirty or scratched.
• Clean the disc.
• Check the connection between the TV and the HDMI jack of the
player.
• Check if your TV supports 480p, 720p, 1080i or 1080p HDMI input
resolution.
• If random noise appears on the screen, it means that TV does not
support HDCP (High-bandwidth Digital Content Protection).
PROBLEM
AllShare function
I can see folders shared through • AllShare only shows Video, Photo, and Music files. Other types of
AllShare, but I cannot see the files. files are not displayed.
The video plays intermittently. • Check if the network is stable.
• Check if the network cable is properly connected and if the network
is not overloaded.
• The wireless connection between the DLNA compatible device and
the player is unstable.
Check the connection.
The AllShare connection between the • IP addresses within the same subnetwork should be unique.
player and the PC is unstable. If they are not, IP interference can cause this phenomenon.
• Check if you have a firewall enabled.
If so, disable the firewall function.
BD-LIVE
I cannot connect to the BD-LIVE server. • Test whether the network connection is successful using the
Network Status function. (See page 15)
• Check whether a USB memory device is connected to the player.
• The memory device must have at least 1GB of free space to
accommodate the BD-LIVE service.
You can check the available size in BD Data Management. (See
page 15)
• See if the BD-LIVE Internet Connection option is set to Allow(All).
• If all above fails, contact the contents provider or update the player
to the latest firmware.
SOLUTION
31 |
English