Figure 35: Select A Restored Database To Undo Dialog Box - NorthStar GM1708 961X Installation Manual

961 INSTALLATION MANUAL Revision A
which database you've just restored, press either the USER PREFER-
ENCE key, the WAYPOINTS AND ROUTES key, or the ALL key. In
the sample screen below, only the USER PREFERENCE key appears.

Figure 35: Select a restored database to undo dialog box

2. Press the CONFIRM key. The 961 removes the restore files from the
database.
Saving log data
Occasionally, the 961 may have a problem that requires looking at its log
files to determine the cause. If this happens, you'll be prompted to save
the 961's log files, which should then be sent to the Northstar Service
Department. If you have any questions, call Northstar and ask to speak
with a marine service technician.
To save the log files:
1. Press the STAR key until you reach the SERVICE MENU screen, then
press the DATABASES AND LOG key.
2. At the DATABASE FUNCTION screen, press the SAVE LOGS key. The
SAVE LOG DATA dialog box appears.
SECTION FOUR - Service/Maintenance
Page 67