Disable Acoustic Call Signalling (Quick Access); Rejecting A Call - Funkwerk D4 Office Operating Manual

D4 Office

Disable acoustic call signalling (quick access)

Precondition: Your handset is in its basic condition (idle display).
1
Pressing key [1] long switches off the acoustic call signalling and switches on
the vibrator.
The header line of the idle display then shows a crossed out bell
minder.
1
Pressing key [1] long anew switches back again to the settings according to
Menu > Setup > Phone settings > Audio settings > Signalling.
The crossed out bell

Rejecting a call

Your handset rings.
Pressing the
LEFT SOFTKEY
hears the busy tone.
in the header line of the idle display disappears.
[Clear] rejects the calling party. The calling party
The telephone features
as a re-
119