Other Features; Set The Alarm Timer; Select A Preset Radio Station; Delete From A Usb Device - Philips FWM6500 User Manual

10 Other features

Set the alarm timer

This unit can be used as an alarm clock. A disc,
radio, or USB device is activated to play at a
preset time.
Note
‡
If you have set a record timer and an alarm timer, only
the latest timer is activated.
1
Ensure that you have set the clock
correctly.
2
Press to switch to standby mode.
3
Press and hold TIMER for more than
2 seconds.
» A prompt to select the source is
displayed.
4
Press CD 1/2/3, or TUNER or USB 1/2 to
select a source.
5
Press TIMER WR FRQÀUP
» The clock digits are displayed and
begin to blink.
6
Press ALB/PRESET+/- to set the hour.
7
Press / to set the minute.
8
Press TIMER WR FRQÀUP
» The timer is set and activated.
To deactivate or reactivate an alarm timer
1
In the standby mode, press TIMER
repeatedly.
» If the timer is activated,
» If the timer is deactivated,
disappears.
Tip
‡
In MP3 link or AUX mode, the alarm timer cannot be set.
‡
,I D GLVF RU 86% VRXUFH LV VHOHFWHG EXW QR DXGLR ÀOH FDQ
be played, radio is activated automatically.

Select a preset radio station

In tuner mode, press ALBUM/PRESET+/- to
select a preset number.
‡
‡

Delete from a USB device

1
2
3
&RS\ ÀOHV IURP 86%  WR
USB 2
<RX FDQ FRS\ 03  :0$ ÀOHV IURP 86% 
device to USB 2 device.
1
2
is displayed.
3
Tip
Position the antenna as far as possible from TV, VCR, or
other radiation source.
For optimal reception, fully extend and adjust the
position of the antenna.
During play from a USB device, press
/ WR VHOHFW DQ DXGLR ÀOH
‡ To delete an audio folder, in the stop
position, press ALB/PRESET+/- to
select an audio folder.
Press USB DELETE.
» $ FRQÀUPDWLRQ PHVVDJH LV GLVSOD\HG
While the message is displayed, press
USB DELETE DJDLQ WR FRQÀUP
‡ To cancel, press .
Connect both USB device to USB 1 PLAY
and USB 2 PLAY/REC sockets.
Press USB 1/2 to select the USB 1 PLAY
source.
6HOHFW DQ DXGLR ÀOH
EN 20