Table of Contents
Advertisement
DTE Connection
DTE INTERFACE SPECIFICATIONS
Insert each DTE cable into a DTE connector. Insert the
opposite end into the DTE. Secure the connect screws to
complete the connection.
The DTE interface to the UTA220 is through an EIA-232
D/E 25-pin D-type connector. The UTA220 can also be
configured for V.35 operation. It is also available with V.35
interfaces and with two additional ports for EIA-366 dialing,
or EIA-232C operation.
UTA220/UTA220k
Installation
2-3
Advertisement
Table of Contents
