Parameter 1: Pad Recall Character - Motorola UTA220/UTA220k User Manual

Table 12-6: CCITT X.3 Parameter Profiles (Continued)
10 Line folding
11 Binary speed of DTE
12 Flow control of PAD by DTE
13 Line feed insertion after carriage re-
turn
14 Padding after line feed
15 Editing
16 Character delete
17 Line delete
18 Line display
19 Editing PAD service signals
20 Echo mask

Parameter 1: Pad Recall Character

Value
0 No character will result in PAD recall in either the data transfer or
connect-in-progress mode
1 PAD recall character = DLE. The character DLE (10H) can be used
for PAD recall. (DLE = Ctrl P) *
* default
This parameter designates the PAD recall character. PAD
recall allows for escape from the PAD data transfer mode or
connect-in-progress mode to the PAD command mode in order
to execute a PAD command. Only one PAD command can be
executed after the PAD has escaped to the PAD command
mode. Once executed, the PAD returns to the previous mode
(i.e., data transfer or connect in progress). If parameter 5 is set
to 1, when PAD recall is executed, the PAD will output an
XOFF before displaying the PAD prompt.
Table 12-7: PAD Recall Character
Description
UTA220/UTA220k
D-Channel X.25
0 0
- -
0 1
0 0
0 0
0 0
127 127
24 24
18 18
1 1
0 0
12-19