Hardware Installation - Vivotek FD836B-(E)HVF2 User Manual

VIVOTEK

Hardware Installation

1. Jot down the camera's MAC address for later reference. This is especially important if
you install numerous cameras at an installation site.
1
Network Camera
Model No: XXXXXX
MAC: 0002D1083236
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Pat. 6,930,709
2. Remove the dome cover by loosening the retention screws on the dome cover.
2
6 - User's Manual
Made in Taiwan