Push Video Configuration; Pin Connection - Velleman DVR8H3 Quick Installation Manual

3. In zoom mode, click and drag the red frame at the bottom left of the screen to move to the area you want
to see.
4. To exit, right-click anywhere on the screen.
Note: You need to exit the zoom mode before you can use other DVR functions.
10.

Push Video Configuration

10.1 Pin Connection

This DVR can send notifications to your mobile devices, such as iPhone, iPad, and Android mobile devices, if an
an alarm event occurs (push video). However, only certain alarm-in pins support this function.
There are several methods to connect alarm sensors for push video:
via the push video alarm-in terminal
via the external I/O port.
Push Video Alarm-In Terminal
A push video alarm-in terminal is provided on the DVR rear panel. Refer to the table below for the pin
connections that support push video and their corresponding video channels.
Alarm
Alarm 1
Alarm 2
External I/O port
Refer to the table below for the pin connections that support push video and their corresponding video
channels.
Pin
Pin 2
Pin 15
V. 01 – 24/10/2013
DVR8H3
Corresponding video channel
CH1
CH2
Corresponding video channel
CH1
CH2
14 ©Velleman nv