Push Video Configuration - Velleman NVR5 Quick Installation Manual

2. In the playback panel, press the play button
3. The fast forward
repeatedly to increase/decrease the speed to 4x, 8x, 16x, or 32x (max.).
4. Press the pause button
5. Press the stop button

11. Push Video Configuration

Configuring the WAN port
1. Make sure the NVR is properly connected to the router with a RJ45 network cable.
2. From your NVR, select (ADVANCED CONFIG), and select "Network" "WAN".
Configuring Push Video
Before configuring push video, make sure that:
The NVR is set up as described above.
•
• The NVR is connected to the internet.
You have installed and configured the EagleEyes app on your iPhone, iPad, or Android mobile devices (see
•
below).
To configure push video:
1. Right-click on the screen to show the main menu and select
2. Set GUARD to ON.
3. Configure your alarm sensor type (normal open or normal closed).
Important
You have to select the opposite type for push video to work correctly.
If your alarm sensor is N.C. (normal closed, alarm goes off when the contact opens), select ALARM N.O.
•
If your alarm sensor is N.O. (normal open, alarm goes off when the contact closes), select ALARM N.C.
•
4. Open EagleEyes and add the DVR to the EagleEyes address book.
For more information on EagleEyes operation, please visit www.eagleeyescctv.com.
V. 01 – 14/04/2014
and fast rewind buttons increase/decrease the playback speed. Press the button
to pause playback.
to stop playback and return to live monitoring.
NVR5
. The recorded files are shown.
ADVANCED CONFIG > NOTIFY.
10 ©Velleman nv