TA B L E O F C O N T E N T S Welcome & Congratulations ........2 Care & Cleaning ..........10 Important Safety Instructions .........3 Before You Call ..........12 Before Setting Surface Controls ......6 Major Appliance Warranty ........16 Setting Surface Controls ........8 www.frigidaire.com USA 1-800-944-9044 www.frigidaire.ca Canada 1-800-265-8352...
WELCOME & CONGRATULATIONS Congratulations on your purchase of a new appliance! At Product Registration Electrolux Home Products, we are very proud of our product and are completely committed to providing you Register Your Product with the best service possible. Your satisfaction is our The PRODUCT number one priority.
IMPORTANT SAFETY INSTRUCTIONS Read all instructions before using this appliance. • Remove all tape and packaging wrap before using the cooktop. Destroy the carton and Save these instructions for future reference. plastic bags after unpacking the cooktop. Never allow children to play with packaging material. Do not WARNING remove the model/serial plate attached to the cooktop.
IMPORTANT SAFETY INSTRUCTIONS • DO NOT TOUCH SURFACE BURNERS, GRATES, OR WARNING AREAS NEAR THESE BURNERS. Surface burners may be hot even though the ﬂ ames are not visible. Areas Do not use stove top grills on your sealed gas near surface burners may become hot enough to cause burners.
IMPORTANT SAFETY INSTRUCTIONS GROUNDING INSTRUCTIONS CONVERSION TO LIQUEFIED PETROLEUM For personal safety, the cooktop must be properly GAS (OR L.P. GAS) grounded. For maximum safety, the power cord must be This natural gas range is designed to allow for conversion plugged into an electrical outlet that is correctly polarized to Liqueﬁ...
BEFORE SETTING SURFACE CONTROLS LOCATIONS OF THE GAS SURFACE PLACEMENT OF BURNER HEADS AND BURNERS CAPS Your cooktop is equipped with gas surface burners with To prevent ﬂ are-ups and avoid creation of harmful by- different BTU ratings. The ability to heat food quicker and products, do not use the cooktop without all burner caps in larger volumes increases as the burner size increases.
BEFORE SETTING SURFACE CONTROLS PLACEMENT OF BURNER HEADS AND CAPS Double Ring Style Burners Round Style Burners The burner cap lip (See Fig. 1) should ﬁ t snug into the The Double Ring burner only operates properly with two center of burner head and rest level. Refer to Figs. 2 & burner caps in place.
SETTING SURFACE CONTROLS SETTING PROPER SURFACE BURNER SETTING THE REGULAR BURNERS FLAME SIZE 1 Place cooking utensil on surface burner. 2 Push the surface control knob down and turn For most cooking - start on the highest control counterclockwise out of the OFF position. setting and then turn to a lower one to complete the 3 Release the knob and rotate to the LITE position (see process.
SETTING SURFACE CONTROLS SETTING THE DUAL RING BURNER Simmering Operation (Figure 1; Zone A) The Dual Ring Burner has two rings of ﬂ ame that you can 1. Place a small cooking utensil centered over the dual control for two different heat levels, one for small and surface Burner Grate.
CARE & CLEANING CLEANING VARIOUS PARTS OF YOUR COOKTOP Before cleaning any part of the cooktop, be sure all controls are turned OFF and the cooktop is COOL. REMOVE SPILLOVERS AND HEAVY SOILING AS SOON AS POSSIBLE. REGULAR CLEANING WILL REDUCE THE NUMBER OF MAJOR CLEANING LATER.
CARE & CLEANING CLEANING THE BURNER HEADS CLEANING THE BURNER CAPS Lift the burner cap from the burner head. The surface Should you ever need to remove the burner caps for burner heads are secured to the cooktop and must be cleaning lift the burner cap off the burner head.
BEFORE YOU CALL (Solutions to Common Problems) IMPORTANT Before you call for service, review this list. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance. OCCURRENCE POSSIBLE CAUSE/SOLUTION Surface burners do...
MAJOR APPLIANCE WARRANTY Your appliance is covered by a one year limited warranty. For one year from your original date of purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used and maintained in accordance with the provided instructions.