Identification Of Symbols - Partner T265 CPS Instruction Manual

IDENTIFICATION (WHAT IS WHAT?)
14
15
13
16
11
12
1. TRIMMER HEAD
7. THROTTLE TRIGGER
2. TRIMMER LINE
8. ON/OFF SWITCH
3. SHIELD
9. THROTTLE TRIGGER LOCK
4. BLADE
5. OUTPUT SHAFT 10. CHOKE LEVER
6. "P" HANDLE 11. STARTER ROPE HOUSING

IDENTIFICATION OF SYMBOLS

Read and understand the Instr-
uction Manual and all warning
labels before using the machine.
Whenever the machine is in use,
safety glasses must be worn to
safeguard against flying objects.
Ear protection must also be used
in order to protect to operators
hearing. If the
working in an area where there is
a risk of falling objects a safety
helmet must also be worn.
WARNING:
Wear gloves to protect
your hands
Wear foot protection
Beware of thrown objects
4
OUT
15m(50ft)
operator is
Hot surface.
110
13300
-- 2 --
12. FUEL TANK
13. AIR FILTER COVER
14. STARTER HANDLE
15. MUFFLER SHIELD
16. PRIMER BULB
17. SHOULDER HARNESS
18. COUPLER
Keep people or animals at least
15m away from the machine
during operation
WARNING:
Cutting elem-
ents continue to rotate after the
engine turned off
WARNING:
Rotating blades
Guaranteed sound power level
LWA accordance with directive
2000/14/EC + 2005/88/EC
Maximum rotational frequency of
the spindle for cutting head
Maximum rotational frequency of
the spindle for blade
17