03 Instruments and controls
Hazard warning flashers
The hazard warning flasher should be used to
indicate that the vehicle has become a traffic
hazard.
When the function is activated, both turn sig-
nal indicators in the instrument panel will
flash.
03
Location of the hazard warning flasher button
–
To activate the flashers, press the button
in the center dash. Press the button again
to turn off the flashers.
NOTE
•
Regulations regarding the use of the
hazard warning flasher may vary,
depending on where you live.
•
The hazard warning flashers will be
activated automatically if an airbag
deploys.
88
Related information
•
Turn signals (p. 88)
Turn signals
The turn signals are controlled by the left
steering wheel lever.
Turn signals
When changing lanes
The driver can automatically flash the turn
signals 3 times by moving the turn signal
lever up or down to the first position and
releasing it.
When turning
Move the lever as far up or down as pos-
sible to start the turn signals. The turn signals
will be cancelled automatically by the move-
ment of the steering wheel, or the lever can
be returned to its initial position by hand.