Nortel COMPANION C3050 REV2 User Manual page 5

Setting your portable
to ring
2
Note: The three buttons directly below your portable's display are
called softkeys. Their labels appear on the display with an underline
above the button to which they are assigned. A softkey label is shown
like this in this user guide:
To set your portable to one of the three ringing options,
select the top ( » ), middle ( « ), or bottom ( ‚ ) position of the
control switch.
REDIAL
.
top: portable on, rings normally
middle: portable on, rings once or
not at all, (see "Discrete Ring" on
page 13)
bottom: no incoming calls, but
outgoing calls can be made if the
flap is open